Fill out the form below to get in touch with a Hunter Douglas Architectural representative.
A member of our team will contact you within 48 hours.
Classic look, durable construction
This modern alternative to traditional wooden shutters is virtually maintenance-free. The polyresin compound used to make the shutter is colour-fast, with UV stabilisers designed for strength and durability.
Hunter Douglas Architectural PolySatin Shutters will not blister, peel, flake, corrode or fade and will never need painting, making them suitable for internal or external applications. The colour is a permanent finish resistant to dents and scratches. Should a scratch occur, it can be removed without harming the finish.
- Child safe and non toxic.
- Suitable for internal and external applications.
- Fire retardant.
- Environmentally friendly.
- The shutter will not blister, peel, flake, corrode or fade. The colour is a permanent finish resistant to dents and scratches.
- Easy maintenance - they can be simply removed and washed with a hose.
- Suitable for high humidity areas.
- Superior light control: louvres can be rotated 180 degrees to open or fully close in both directions.
- Patented Clearview Tilt Bar: Hidden louvre joiners provide an unobstructed view.
- Australian manufactured.
- Hinged and Hinged Bi-fold Shutters
Standard Hinged Systems can consist of one or more shutter panels hinged in a variety of configurations. Single panels can be individually hinged, or two panels may be hinged together from the frame in a Hinged Bi-Fold design. They can be single hung or double hung, with more options possible.
- Bi-fold on Track Shutters
Bi-Fold on Track Systems allow up to eight panels to be hinged together. Panels are connected to a top and bottom track, which supports the panels and guides their folding movements. Panels must be hinged together in multiples of two to enable them to operate within the bottom track.
- Sliding Shutters
Shutter panels in a By-Pass Track System are not hinged. Instead, they slide on top tracks to open and close. The By-Pass System allows you to cover wide widths. Note: Only the 64mm louvre will pass in the fully open position.
- Specialty Shapes
Available in Elliptical, Eyebrow, Half-Circle, Quarter-Circle, Tunnel, Hexagon, Angle Top, Symmetrical Angle Top, Full Rake and Half Rake.
- Three colours available: Pearl, Vanilla and White.
- 64mm, 89mm and 114mm louvre width available.
Shadelight PolySatin shutters can be cleaned with just soap and water. For additional convenience, the two-part hinge system allows the shutter panels to be easily removed from the window, taken outdoors and hosed. This shutter system can be removed from the window by a single person within seconds, and reinstalled without needing a manual.
The general wellbeing of a building's occupants contributes to the cost benefit of sustainable design. Hunter Douglas' overall shading strategy addresses daylighting, glare control, management of heat gain and general aesthetics. Each plays a key role in improving indoor environmental quality, conserving energy and supporting built environments that are comfortable, healthy, productive, and sustainable.
Available in a modern colour range and manufactured in Australia, PolySatin Shutters are kind to the environment - more than 95% of the polyresin production waste can be granulated and recycled. Due to the longevity of the product’s performance it will outlast alternative products, requiring less energy resources for replacements.
Indoor Environmental Quality
Hunter Douglas is committed to meeting the growing demand for healthier, more sustainable products. Meeting the rigorous and comprehensive standards for low emissions of VOC's, our GREENGUARD® Certified and GREENGUARD® Gold Certified fabrics contribute to the overall indoor air quality and general health of a building space.